Hydraulics

Series H1 variable displacement motors are bent axis design, incorporating spherical pistons. These motors are designed primarily to be combined with other products in closed circuit systems to transfer and control hydraulic power. Series H1 motors have a large maximum/minimum displacement ratio of 5:1 and high output speed capabilities.

Series H1 variable displacement motors are bent axis design, incorporating spherical pistons. These motors are designed primarily to be combined with other products in closed circuit systems to transfer and control hydraulic power. Series H1 motors have a large maximum/minimum displacement ratio of 5:1 and high output speed capabilities.

Needle valve CP610-7-B-0E Comatrol, bi-directional, fine metering, reverse free flow. This valve has a free flow from 1 to 2 and a choke effect from 2 to 1.

This valve is designed for low leakage applications and can be used in a circuit with a single acting cylinder to control motion, provide load holding or as a general purpose diverter or dump valve.
Download the Data Sheet for further technical information, you can find it in the product sheet.

Alluminium housing NCS06/3-SE 3/8 (D) Danfoss ex Comatrol 

Code 157B4032 is replaced by code 11166817

Danfoss Seal kit last longer than other brands' kit, we suggest you use original spare parts.
SACE offers a wide range of Seal Kit AVAILABLE!
*Image for illustration purposes only

PVG 32
Proportional flow and pressure control
Up to 12 modules
Various types of controls (hydraulic, manual, electric)
CAN BUS controls (CAN OPEN and ISOBUS protocols)
Reduced weight
*Image for illustration purposes only

PVG 32
Proportional flow and pressure control
Up to 12 modules
Various types of controls (hydraulic, manual, electric)
CAN BUS controls (CAN OPEN and ISOBUS protocols)
Reduced weight
*Image for illustration purposes only

151G0001 - OMM ORBITAL MOTOR
Shaft style: cylindrical
Displacement: 12,5 
Diameter: Ø16
Port size: end port
Port dimension: G 3/8
*Image for illustration purposes only.

151G0002 - ORBITAL MOTOR OMM 20
Shaft style: Cylindrical
Displacement: 20
Diameter: Ø16
Port size: end port
Port dimension: G 3/8
*Image for illustration purposes only.

151G0005 - OMM 20 ORBITAL MOTOR
Shaft style: cylindrical
Displacement: 20
Diameter: Ø16
Porta style: side port
Port dimension: G 3/8
*image for illustration purposes only

151G0013 - OMM ORBITAL MOTOR
Displacement: 50
Diameter: Ø16
Port size: Side port
*image for illustration purposes only

Port Size: P=3/4 BSP T=3/4 BSP

*The image is an illustrative purpose

*image for illustration purposes only

Orbital Motors
We provide a wide range of hydraulic motors of different types, sizes, and with different versions of outlet shaft. The range includes motors with displacements from 8 to 800 cc/rpm. The speed may vary approximately from 2500 rpm/min for the smallest motor up to 600 rpm/min for the largest one.

Orbital Motors
We provide a wide range of hydraulic motors of different types, sizes, and with different versions of outlet shaft. The range includes motors with displacements from 8 to 800 cc/rpm. The speed may vary approximately from 2500 rpm/min for the smallest motor up to 600 rpm/min for the largest one.

Orbital Motors
We provide a wide range of hydraulic motors of different types, sizes, and with different versions of outlet shaft. The range includes motors with displacements from 8 to 800 cc/rpm. The speed may vary approximately from 2500 rpm/min for the smallest motor up to 600 rpm/min for the largest one.